Mar. 04, 2021
In the process of making bags by the plastic bag making machine, sometimes the length of the finished plastic bags is different. The products produced in this way are not qualified. What causes this phenomenon? The Bag Making Machine Supplier will give you answers
When there is too much dust on the photoelectric controller, it will affect the luminosity and intensity of the laser, so that the length of the plastic bag cannot be controlled very accurately.
Bag Making Machine
Since the quality of the Bag-Making Machines of some merchants cannot be guaranteed and poor quality photoelectric head accessories are used, the sensitivity is not up to standard. The solution is to replace the photoelectric head.
As a result, some supporting accessories cannot be more up-to-date, and the speed should be reduced for testing.
Increase the feeding pressure.
Feeding is too fast, too slow or too tight, and the pressing device is too loose, this phenomenon is prone to different lengths of plastic bags.
The quality of the tracking accessories is not good, or the actual effect is not obvious after using for too long, and it cannot perform its due function well.
The company provides roll bag making machine and Flat Bag Making Machine, please feel free to contact us if you need it